Why is one room uncomfortable?
A duct connection, a return-air problem, a clogged 1-inch filter, a damper, or restricted airflow at the equipment can each cause it.
A room that stays uncomfortable, a register that whistles, or a duct that's come apart - common enough in Brunswick's older houses near the tracks, where decades of additions and retrofits have left their mark on the air path. We check where the air actually goes.
Tell us the room, the vent, the door position, the noise, and whether it changes with the blower. Don't work around gas or electrical equipment.
A room that stays uncomfortable, a register that whistles, or a duct that's come apart - common enough in Brunswick's older houses near the tracks, where decades of additions and retrofits have left their mark on the air path. We check where the air actually goes.
We can follow the supply and return paths, the accessible connections, dampers, insulation, registers, and the equipment's airflow.
Diagnosis first, then a written recommendation and your approval. After that comes the repair, and we test the system again before we call it done.
A disconnected or damaged section is often a focused repair. If the comfort issue runs bigger than that, we'll explain it separately from the duct section we're fixing.
A duct connection, a return-air problem, a clogged 1-inch filter, a damper, or restricted airflow at the equipment can each cause it.
Stay off runs you can't reach and away from equipment areas. A surface patch can hide the real break underneath it.
Usually not, unless there's smoke, sparking, gas odor, a carbon monoxide alarm, or a breaker that keeps tripping.
Tell us what changed and what the system is doing now.